Waterblasters are a great tool for industrial, commercial, and construction business. Fast and more effective cleaning, waterblasters can be used for cleaning grime, dirt, mud, and concrete off manual tools and equipment to keep them in top condition, as well as washing cars, bikes, boats, caravans, trailers, and more. If you have large areas to clean like floors, roofs, building exteriors, and anything else outdoors, a water blaster will take away the need for you to do it all by hand. Depending on the type and power of the water blaster you use, it can be a handy way of stripping away loose paint from metal, wood, concrete and other surfaces, and degreasing motor engines or BBQs.
Tips For Using A Water Blaster
To help you pick the best water blaster, NZ customers can rely on our team of experts who are available to answer any questions you have. Here’s some tips for using waterblasters NZ customers will find useful:- It’s important to follow the safety instructions of the water blaster, and don’t let the unit run dry. Always ensure there is adequate water available to the pump.
- Start at a lower pressure away from the surface area you wish to clean and then move in gradually.
- To avoid any potential damage to a surface, don’t aim the nozzle directly on it or too close. You should stand a few feet away and hold the nozzle at a slight angle.
- To get the best results for a very dirty piece of equipment or surface, start from the bottom and move your way to the top, then rinse again from the top down.
- Think about the delicacy of the item or surface area, and change the nozzle or adjust the pressure accordingly. Water should be softer on those materials more susceptible to damage.
- If your cleaning requires chemicals, spray a light coating and let it sit for a few minutes before rinsing it off using clean water in the waterblaster. Also, read the label on the chemical to ensure it’s safe or suitable for the item/area you are cleaning.
- If using chemicals in your waterblaster, then make sure you flush it with clean water and run it through the pump nozzle as well.
- Always drain the waterblaster before storing it away, and don’t leave it outside in the elements as this can damage the machine no matter how good the brand or manufacturer is.